Autodesk Manufacturing Monthly Webinars

[clinton.perry]

Hi forum members!

We recently started running a series of 30 minute webinars that relate to the following Autodesk software:-

• PowerMill
• FeatureCAM
• PowerShape
• PowerInspect

Our first webinars were held in March 2017 as follows:-

8th March (AM) - PowerShape - Re-engineering primitives from points, clouds and meshes - click to watch recording

8th March (PM) - PowerMill - Getting the best from model area clearance - click to watch recording

9th March (AM) - FeatureCAM - 5 tips based on commonly asked questions - click to watch recording

9th March (PM) - PowerInspect - Tools and techniques to boost your inspection productivity - click to watch recording

Notes:

1. The webinars are run from the UK (during GMT daylight hours 9am - 5pm).
2. Webinars are hosted by highly experienced technical specialists (most have worked here since the days of Delcam)
3. We use GoToWebinar to broadcast the webinars LIVE.
4. Webinar recordings can be watched on-demand afterwards
5. We want to hear your views on what to show in future webinars - here's your chance to have a say!

We're actively working on setting up a website to include links to future webinars. Watch this space for more information.

In the meantime, if you'd like to learn more about the UK webinars, contact mfg-uk@autodesk.com. 

Thanks!

[clinton.perry]

Next month's webinar themes will be as follows. To register to attend, click the "click here" links below:-

PowerShape

Topic: Core / Cavity separation techniques

Date/Time: 10am British Summer Time (BST), Wednesday 5^th April

Click here to register for the PowerShape webinar

PowerMill

Topic: Flowline Finishing and Profile Finishing

Date/Time: 2pm BST, Wednesday 5^th April

Click here to register for the PowerMill webinar

FeatureCAM

Topic: Machining Configurations - how to use them to change starting defaults

Date/time: 10am BST, Thursday 6^th April

Click here to register for the FeatureCAM webinar

PowerInspect
Topic: Which alignment should I use to measure my part?

Date/time: 2pm BST, Thursday 6^th April
Click here to register for the PowerInspect webinar

[clinton.perry]

Hi forum members!

The recordings of this month's webinars are now available to view using the links below:-

• PowerShape: Core / Cavity separation techniques - watch now
• PowerMill: Flowline Finishing and Profile Finishing - watch now
• FeatureCAM: Machining Configurations - how to use them to change starting defaults - watch now
• PowerInspect: Which alignment should I use to measure my part? - watch now

Next month's webinars will be as follows:-

PowerShape
Title: Model analysis tools

Date/time: Wednesday May 3^rd, 10am BST

Register now

PowerMill
Title: Machine axis control (Orientation Vectors)
Date/time: Wednesday May 3^rd, 2pm BST

Register now

FeatureCAM
Title: Post processor editing - 5 simple changes you can make yourself
Date/time: Thursday May 4^th, 10am BST

Register now

PowerInspect

Title: Use the extensive capability of PowerInspect to enhance your inspection process
Date/time: Thursday May 4^th, 2pm BST

Register now

Notes:

1. The webinars are run from the UK (during GMT daylight hours 9am - 5pm).
2. Webinars are hosted by highly experienced technical specialists (most have worked here since the days of Delcam)
3. We use GoToWebinar to broadcast the webinars LIVE.
4. Webinar recordings can be watched on-demand afterwards
5. We want to hear your views on what to show in future webinars - here's your chance to have a say!

We're actively working on setting up a website to include links to future webinars. Watch this space for more information.

In the meantime, if you'd like to learn more about the UK webinars, contact mfg-uk@autodesk.com. 

Thanks!

[hannah.harlock]

Hi All!

As you will hopefully now be aware, the 2018 versions of PowerShape, PowerMill,  FeatureCAM and PowerInspect have now been released.

We will be running What's New webinars from the UK showing the new versions on 17th and 18th May.

Please see the schedule and registration links below:  

PowerShape 2018 – What’s new
Date/time: Wednesday May 17th, 10am BST
Register now

PowerMill 2018 – What’s new
Date/time: Wednesday May 17th, 2pm BST
Register now

FeatureCAM 2018 – What’s new
Date/time: Thursday May 18th, 10am BST
Register now

PowerInspect 2018 – What’s new
Date/time: Thursday May 18th, 2pm BST

Register now

Please note:

1. The webinars are run from the UK (during GMT daylight hours 10am and 2pm).
2. Webinars are hosted by highly experienced technical specialists (all have worked here since the days of Delcam)
3. We use GoToWebinar to broadcast the webinars LIVE.
4. Webinar recordings can be watched on-demand afterwards

We are actively working on setting up a website to include links to future webinars. Watch this space for more information.

In the meantime, if you'd like to learn more about the UK webinars, contact mfg-uk@autodesk.com  

Thanks!

Hannah

Hannah Harlock

Marketing Executive

UK Field Marketing

Autodesk Ltd.

Small Heath Business Park

Birmingham, B10 0HJ, England

www.autodesk.com/MAKE

[hannah.harlock]

Hi All

Sorry for the delay but the recordings of the May tips and tricks webinars are now available to view on our new web page.

Please visit www.autodesk.co.uk/mfg-webinars and click on the 'webinars on demand' tab to view May's recordings and all past webinars. You can also view and register for all upcoming UK webinars on this site. The June tips and tricks have just been uploaded for you to register. 

The recordings from the 'What's new in 2018' webinars which are taking place this week will be uploaded shortly for you to view. 

We also had feedback from some customers saying that they weren't receiving notification about the webinars so we have added a sign-up form which allows you to request to receive emails about all upcoming UK webinars. You can specify which type of webinars you are interested in so that you only get the information you want.

I hope that this makes registering and viewing our webinars easier now that you only have one link to remember and they are all in one place.

I appreciate any feedback you may have on this site too.

Thank you for your patience.

Kind Regards

Hannah

[hannah.harlock]

Hi All

The recording of the 'What's New in PowerShape 2018' webinar held last week is now available to watch on www.autodesk.co.uk/mfg-webinars

Kind Regards

Hannah

[hannah.harlock]

Next month's UK webinars will be as follows:-

PowerShape
Title: Powershape reverse engineering #1

Date/time: Wednesday August 9th, 10am BST

Register now

PowerMill
Title: Curve & Surface Projection Toolpaths
Date/time: Wednesday August 9th, 2pm BST

Register now

FeatureCAM
Title: Utilizing your Part Library

Date/time: Thursday August 10th, 10am BST

Register now

PowerInspect

Title: Feature inspection without CAD
Date/time: Thursday August 17th, 2pm BST

Register now

Please note that as they are being run in UK, all of the times are in British Summer Time (BST)

Please visit https://www.autodesk.co.uk/campaigns/mfg-webinar/webinars-on-demand/all to watch all past webinar recordings.

Thank you

Hannah

[hannah.harlock]

The tips and tricks webinars are back in November!

Make sure you register your place to get the most out of your Autodesk software.

PowerShape
Title: Powershape reverse engineering #2

Date/time: Wednesday November 2nd, 10am GMT

Register now

PowerMill
Title: Basic customisation
Date/time: Wednesday November 2nd, 2pm GMT

Register now

FeatureCAM
Title: Introduction to Surface Milling #1

Date/time: Thursday November 3rd, 10am GMT

Register now

Please note that as they are being run in UK, all of the times are in GMT.

Please visit https://www.autodesk.co.uk/campaigns/mfg-webinar/webinars-on-demand/all to watch all past webinar recordings.

Thank you

Hannah

[hannah.harlock]

The tips and tricks webinars will be continuing in the New Year!

Make sure you register your place to get the most out of your Autodesk software.

PowerShape
Title:Surfacing Editing Tools #1

Date/time: Thursday January 25th, 10am GMT

Register now

PowerMill
Title: Curve Machining
Date/time: Wednesday January 24th, 10am GMT

Register now

FeatureCAM
Title: Introduction to Surface Milling #2

Date/time: Wednesday January 24th, 2pm GMT

Register now

Please note that as they are being run in UK, all of the times are in GMT.

Please visit https://www.autodesk.co.uk/campaigns/mfg-webinar/webinars-on-demand/all to watch all past webinar recordings.

[jellis]

.

[joe7878sch]

Perhaps it is time to unpin this thread?

[clinton.perry]

Thanks Joe! We are continuing to run webinars and will be promoting the next sessions shortly. In the meantime, you can review our growing library of legacy webinar recordings by visiting the following sites:-

• USA = https://www.autodesk.com/campaigns/design-manufacturing-events/cam
• UK = https://www.autodesk.co.uk/campaigns/mfg-webinar/webinars-on-demand/cam
• German = https://www.autodesk.de/campaigns/mfg-webinar/webinar-on-demand/cad-cam
• French = https://www.autodesk.fr/campaigns/mfg-webinar/webinar-on-demand/fabrication-webinars
• Italian = https://www.autodesk.it/campaigns/mfg-webinar/webinars-on-demand/cam

Enjoy!