No feed rate shows in Heidenhain post file

[karan30782]

Hi !!
All,
I was trying to modify option file for Heidenhain controller. And while editing the post I don't know how, but now when I post any nc program with this post processor all feed parameters convert to +1.
Someone please help me out.
Earlier all was fine, but just after modification all feed gone.
I have attached the option files, nc files and the reference images.

Thanks in Advance !!!

This is Right oneThis is Wrong

[ChristopherMarion · Accepted solution]

Hi @karan30782 

I took a quick look and I don't see anything wrong.  If I post with either of the supplied posts, I get the same feeds.

The main difference is the space between the line number and Q variable....which is what you added.

Perhaps there is something else going on.  I'd try closing everything down and try again.

[cfastNJWK6 · Accepted solution]

I posted one of my programs with your modified post and it came out as expected.  Are you sure you have the feedrates set correctly in PowerMill?  I see that you are comparing two different programs.

[karan30782]

Hey @ChristopherMarion and @cfastNJWK6 

Yes, that was my mistake.. I copied the post processor to another PC & the result was as expected.

Thanks to both of you !!!