hi, at work, we all have our own strategy, since Im the newbie , i learned with a lot opinions.
In between, a lot of tool damages.
Using stock material to calc, is a lot safer, and with colision ON, it becomes more safer.
But time calculation is something i want to improve, i small parts i really dont notice a lot, but with big parts (car bumper, dashboard, Doors,) the component are só big, and time calculation takes longer.
So i have couple question based in your experience so that can my strategy improv.
One thing i never understand is why the computer become so slow after 200 toolpaths.
Last week, i read and article that the biggest speed Enemy was the stock, the bigger is the file, the longer it takes to calc. I usually add all toolpaths to stock has long Im going.
So i have couple question based in your experience so that can my strategy improve
So i have couple question based in your experience so that can improve my strategy
I usually use this Processing:
Rough 20r2 0.7 stock
Raster 35r3 all over 0.5
Rough 10r2 1mm stock
Raster with 32r8 all over 0.3
Rough 8R1 0.25 stock
Raster allover 16BN All Over .13
Rough 4r1 stock .15
Z level 2r.05 with resíduo boundary .15 stock
Finish raster with 12BN(could be 8BN or 4BN)
Etc etc
Every strategy i add to stock, but the computer becomes more and more slower.
Am Im going the right strategy?
I really need to improve the calc strategy, i cant leave the computer running Over the night become i Share the computer with other
