Community
PowerMill Forum
Welcome to Autodesk’s PowerMill Forums. Share your knowledge, ask questions, and explore popular PowerMill topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

G18 G02/G03 & G19 not align with simulation

0 REPLIES 0
Reply
Message 1 of 1
pdubovyk
139 Views, 0 Replies

G18 G02/G03 & G19 not align with simulation

pdubovyk
Explorer
Explorer

Hello everybody,

 

I have not critical however internsting case.

Using post for OSAI - sefl modified and everything is working good.

However during G02/03 profiles with G18-G19 planes I have different from simulation start point.

It's not critical however I would liket to find out the cause to avoid critical issues.

 

In simulation G18 after go to center of circle start for fist hole is X2319.25 intead on post I have move Z569.25.

Ok that is inside cirlce move but why?

and second case for G19 also simulation Z410.75, post provide Y-755.75

 

Please advice what is cause.

 

0 Likes

G18 G02/G03 & G19 not align with simulation

Hello everybody,

 

I have not critical however internsting case.

Using post for OSAI - sefl modified and everything is working good.

However during G02/03 profiles with G18-G19 planes I have different from simulation start point.

It's not critical however I would liket to find out the cause to avoid critical issues.

 

In simulation G18 after go to center of circle start for fist hole is X2319.25 intead on post I have move Z569.25.

Ok that is inside cirlce move but why?

and second case for G19 also simulation Z410.75, post provide Y-755.75

 

Please advice what is cause.

 

Labels (3)
0 REPLIES 0

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report