Hi forum members!
We recently started running a series of 30 minute webinars that relate to the following Autodesk software:-
Our first webinars were held in March 2017 as follows:-
8th March (AM) - PowerShape - Re-engineering primitives from points, clouds and meshes - click to watch recording
8th March (PM) - PowerMill - Getting the best from model area clearance - click to watch recording
9th March (AM) - FeatureCAM - 5 tips based on commonly asked questions - click to watch recording
9th March (PM) - PowerInspect - Tools and techniques to boost your inspection productivity - click to watch recording
Notes:
We're actively working on setting up a website to include links to future webinars. Watch this space for more information.
In the meantime, if you'd like to learn more about the UK webinars, contact mfg-uk@autodesk.com.
Thanks!
Next month's webinar themes will be as follows. To register to attend, click the "click here" links below:-
PowerShape
Topic: Core / Cavity separation techniques
Date/Time: 10am British Summer Time (BST), Wednesday 5th April
Click here to register for the PowerShape webinar
PowerMill
Topic: Flowline Finishing and Profile Finishing
Date/Time: 2pm BST, Wednesday 5th April
Click here to register for the PowerMill webinar
FeatureCAM
Topic: Machining Configurations - how to use them to change starting defaults
Date/time: 10am BST, Thursday 6th April
Click here to register for the FeatureCAM webinar
PowerInspect
Topic: Which alignment should I use to measure my part?
Date/time: 2pm BST, Thursday 6th April
Click here to register for the PowerInspect webinar
@clinton.perry the Powermill webinar is it at 1 or 2 pm GMT? When I register it says 1 pm (9 am EDT) but your posts has it for 2 pm
@iamcdn79 the PowerMill webinar is scheduled for Wed, Apr 5, 2017 2:00 PM - 2:30 PM BST
When you register to attend, you'll be given the option to "Add to Calendar" meaning you can see the exact time in your specific time zone (useful if you're not based in the UK).
Hope this helps!
Hi Clinton,
Thanks for your and Hannahs fast response. Thats how we know it from back in the days.
I would like to see PowerMill Robot specific topics.
- how to handle and adjust the Robot inside powermill on crazy parts and small moving area (how to Workaround singularitys and axis Limits)
- tips for best adjustment on software and post processor for good results on Robot (surface Quality, tolerances)
@clinton.perry It will be so nice, if there are some webinars on PostProcessor too.
I was registered for yesterdays webinar, of course I missed it because I did not get out of bed at 3AM, do you have a link so I can watch this at a later date?
I had registered ahead of time, and was ready to view (Eastern Standard Time), just to find out, that I.T. has it blocked..
It took 20 minutes just to get I.T. on board..By then, it would've been too late anyways.
Looking forward to the stream..
We're counting on you Clinton .
Hi forum members!
The recordings of this month's webinars are now available to view using the links below:-
Next month's webinars will be as follows:-
PowerShape
Title: Model analysis tools
Date/time: Wednesday May 3rd, 10am BST
PowerMill
Title: Machine axis control (Orientation Vectors)
Date/time: Wednesday May 3rd, 2pm BST
FeatureCAM
Title: Post processor editing - 5 simple changes you can make yourself
Date/time: Thursday May 4th, 10am BST
PowerInspect
Title: Use the extensive capability of PowerInspect to enhance your inspection process
Date/time: Thursday May 4th, 2pm BST
Notes:
We're actively working on setting up a website to include links to future webinars. Watch this space for more information.
In the meantime, if you'd like to learn more about the UK webinars, contact mfg-uk@autodesk.com.
Thanks!
When I click "Watch now", it brings me to a register page, which I do, then it brings me to a blank page, and nothing there to watch.
Hey @BearArms - I've double checked the links and they're definitely working here (sorry, I know that doesn't help you). Not sure if this is an I.T. issue your end. Maybe try different browsers (I'm using Chrome for what it's worth).
Can other forum members check and confirm if they can/cannot access the recordings please?
Thanks,
No problem here.
And thanks for providing links for those who missed them on time.
Just watched the powershape recording, worked fine. Using Chrome. It did take a few seconds for the video to start, and during that time it was sort of a blank screen.
Steve
Hi All!
As you will hopefully now be aware, the 2018 versions of PowerMill, PowerShape, FeatureCAM and PowerInspect have now been released.
We will be running What's New webinars from the UK showing the new versions on 17th and 18th May.
Please see the schedule and registration links below:
PowerShape 2018 – What’s new
Date/time: Wednesday May 17th, 10am BST
Register now
PowerMill 2018 – What’s new
Date/time: Wednesday May 17th, 2pm BST
Register now
FeatureCAM 2018 – What’s new
Date/time: Thursday May 18th, 10am BST
Register now
PowerInspect 2018 – What’s new
Date/time: Thursday May 18th, 2pm BST
Please note:
We are actively working on setting up a website to include links to future webinars. Watch this space for more information.
In the meantime, if you'd like to learn more about the UK webinars, contact mfg-uk@autodesk.com
Thanks!
Hannah
Hannah Harlock
Marketing Executive
UK Field Marketing
Autodesk Ltd.
Small Heath Business Park
Birmingham, B10 0HJ, England
Is there a link to the Powermill monthly webinars somewhere other than on this thread ?
Thanks for taking the time and making these videos
Matt
can we see the video from this webinar?
PowerMill
Title: Machine axis control (Orientation Vectors)
Date/time: Wednesday May 3rd, 2pm BST
Hi all,
I'm sorry that I haven't sent the recordings round from last week's webinars yet as we have a new web page in production where you will be able to view all previous webinar recordings and see all upcoming webinars and register for them in one place.
This should be live next week so I will post the link to the web page then.
Sorry to keep you waiting but hopefully the web page will make it easier for you to get all of the recordings you want to watch and see all upcoming topics and dates.
Kind Regards
Hannah
Hi All
Sorry for the delay but the recordings of the May tips and tricks webinars are now available to view on our new web page.
Please visit www.autodesk.co.uk/mfg-webinars and click on the 'webinars on demand' tab to view May's recordings and all past webinars. You can also view and register for all upcoming UK webinars on this site. The June tips and tricks have just been uploaded for you to register.
We also had feedback from some customers saying that they weren't receiving notification about the webinars so we have added a sign-up form which allows you to request to receive emails about all upcoming UK webinars. You can specify which type of webinars you are interested in so that you only get the information you want.
I hope that this makes registering and viewing our webinars easier now that you only have one link to remember and they are all in one place.
I appreciate any feedback you may have on this site too.
Thank you for your patience.
Kind Regards
Hannah