Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Anyone who can share an easier way to get a coordinate system perpendicular to the plane.
Anyone who can share an easier way to get a coordinate system perpendicular to the plane.
I have to work on the 3+2 axis of the yellow pocket in the image, but do I have to manually set the coordinate system perpendicular to the plane in powermill? Can someone who has a macro that can do such a thing simply get support?
There are a lot of ways to create the needed workplane(s). You could extract the holes from the different angles. Each hole with a different axis will have it's own workplane created. Or you can "Create and Orientate a Workplane" and select "Workplane aligned to Geometry". Either method will work quickly and the same inputs (clicks) would be needed through a macro.
