autoCad application setup

Anonymous · ‎05-06-2012

Hi

How can I create a setup for autocad map application. I just want to load the tool (dot net Arx C#) application from user installation directory.

Thanks

Murali

kerry_w_brown · ‎05-07-2012

Write the code.

Compile.

Either NETLOAD

or configure through the registry to demand load.

Regards

// Called Kerry or kdub in my other life.

Everything will work just as you expect it to, unless your expectations are incorrect. ~ kdub
Sometimes the question is more important than the answer. ~ kdub

NZST UTC+12 : class keyThumper<T> : Lazy<T>; another Swamper

Alexander.Rivilis · ‎05-07-2012

http://through-the-interface.typepad.com/through_the_interface/2010/09/building-an-installer-part-1....

http://through-the-interface.typepad.com/through_the_interface/2010/09/building-an-installer-part-2....

http://through-the-interface.typepad.com/through_the_interface/2010/09/building-an-installer-part-3....

Відповідь корисна? Клікніть на "ВПОДОБАЙКУ" цім повідомленням! | Do you find the posts helpful? "LIKE" these posts!
Находите сообщения полезными? Поставьте "НРАВИТСЯ" этим сообщениям!
На ваше запитання відповіли? Натисніть кнопку "ПРИЙНЯТИ РІШЕННЯ" | Have your question been answered successfully? Click "ACCEPT SOLUTION" button.
На ваш вопрос успешно ответили? Нажмите кнопку "УТВЕРДИТЬ РЕШЕНИЕ"

Alexander Rivilis / Александр Ривилис / Олександр Рівіліс
Programmer & Teacher & Helper / Программист - Учитель - Помощник / Програміст - вчитель - помічник
Facebook | Twitter | LinkedIn

kerry_w_brown · ‎05-07-2012

Alexander, I didn't think the AutoLoader would load from user defined folders ... I'll need to re-read those links.

Regards

// Called Kerry or kdub in my other life.

Everything will work just as you expect it to, unless your expectations are incorrect. ~ kdub
Sometimes the question is more important than the answer. ~ kdub

NZST UTC+12 : class keyThumper<T> : Lazy<T>; another Swamper

Alexander.Rivilis · ‎05-07-2012

@KerryBrown wrote:

Alexander, I didn't think the AutoLoader would load from user defined folders ... I'll need to re-read those links.

Regards

Kerry! I do not understand where these topics AutoLoader? These topic's are about creating setup (MSI). 😉

Відповідь корисна? Клікніть на "ВПОДОБАЙКУ" цім повідомленням! | Do you find the posts helpful? "LIKE" these posts!
Находите сообщения полезными? Поставьте "НРАВИТСЯ" этим сообщениям!
На ваше запитання відповіли? Натисніть кнопку "ПРИЙНЯТИ РІШЕННЯ" | Have your question been answered successfully? Click "ACCEPT SOLUTION" button.
На ваш вопрос успешно ответили? Нажмите кнопку "УТВЕРДИТЬ РЕШЕНИЕ"

Alexander Rivilis / Александр Ривилис / Олександр Рівіліс
Programmer & Teacher & Helper / Программист - Учитель - Помощник / Програміст - вчитель - помічник
Facebook | Twitter | LinkedIn

kerry_w_brown · ‎05-07-2012

I may have misinterpreted the OP's question.

Regards

// Called Kerry or kdub in my other life.

Everything will work just as you expect it to, unless your expectations are incorrect. ~ kdub
Sometimes the question is more important than the answer. ~ kdub

NZST UTC+12 : class keyThumper<T> : Lazy<T>; another Swamper

kerry_w_brown · ‎05-08-2012

Would be nice if the OP came back to comment 🙂

// Called Kerry or kdub in my other life.

Everything will work just as you expect it to, unless your expectations are incorrect. ~ kdub
Sometimes the question is more important than the answer. ~ kdub

NZST UTC+12 : class keyThumper<T> : Lazy<T>; another Swamper

Community

autoCad application setup

autoCad application setup

autoCad application setup