Anomaly in Clamp Force Results

[vgvimalkanth]

Hello, I'm using Autodesk Moldflow Insight 2019. 

In that I'm facing an anomaly in Clamp Force Results. The Clamp Force: XY Plot shows the maximum tonnage of 503.3 tonne, while the result log shows the maximum clamp force of 400.46 tonne. 

Can someone help me with this difference of result. I have also attached images for your reference.

[mppkumar · Accepted solution]

Hi @vgvimalkanth 

That particular time frame results are not printed in Log file - Results summary

recommend to  consider clamp force  XY - Plot values 

[madhukeshwart · Accepted solution]

It may be due to Intermediate results are not calculated& you need to  increase the frequency that the intermediate results are recorded.

Suggest you to follow as shown in below image and change the parameters in solver settings ( 4, 5, 6)

you will get better clamp tonnage value prediction. But it takes more simulation time

Hope helps your query

[vgvimalkanth]

Thank you for the reply.

[vgvimalkanth]

Thanks.