Anomaly in Clamp Force Results

vgvimalkanth
Contributor
Contributor

Anomaly in Clamp Force Results

vgvimalkanth
Contributor
Contributor

Hello, I'm using Autodesk Moldflow Insight 2019. 

 

In that I'm facing an anomaly in Clamp Force Results. The Clamp Force: XY Plot shows the maximum tonnage of 503.3 tonne, while the result log shows the maximum clamp force of 400.46 tonne. 

 

Can someone help me with this difference of result. I have also attached images for your reference.

 

Clamp Force XY Plot.JPG

 

Results Log.JPG

 

0 Likes
Reply
Accepted solutions (2)
598 Views
4 Replies
Replies (4)

mppkumar
Advisor
Advisor
Accepted solution

Hi @vgvimalkanth 

 

That particular time frame results are not printed in Log file - Results summary

recommend to  consider clamp force  XY - Plot values 

 

 

Thanks
M P Pradeep Kumar


If my views / comments acceptable, provide "Kudos" as appreciation, if answers your query, please click the "Accept as Solution"
0 Likes

madhukeshwart
Advisor
Advisor
Accepted solution

It may be due to Intermediate results are not calculated& you need to  increase the frequency that the intermediate results are recorded.

 

Suggest you to follow as shown in below image and change the parameters in solver settings ( 4, 5, 6)

you will get better clamp tonnage value prediction. But it takes more simulation time

 

madhukeshwart_1-1634287095118.png

Hope helps your query

 

 

 

 

 

Madhukeshwar Talwar

FORD MOTORS PRIVATE LIMITED, Chennai
mail: madhukeshwart@gmail.com
09600060862
======================================
Please use . Accept as Solution and Give Kudos as appropriate to further enhance these forums. Thank you! .....
0 Likes

vgvimalkanth
Contributor
Contributor
Thank you for the reply.
0 Likes

vgvimalkanth
Contributor
Contributor
Thanks.
0 Likes