Moldflow Adviser Forum
Welcome to Autodesk’s Moldflow Adviser Forums. Share your knowledge, ask questions, and explore popular Moldflow Adviser topics.
abbrechen
Suchergebnisse werden angezeigt für 
Anzeigen  nur  | Stattdessen suchen nach 
Meintest du: 

Dual domain in tutorial versus software

8 ANTWORTEN 8
Antworten
Nachricht 1 von 9
victormarian
238 Aufrufe, 8 Antworten

Dual domain in tutorial versus software

Hello,

 

I Moldflow adviser 2024, in some tutorials (fill analysis quick start tutorial and others) it says to choose 2D analysis when importing the part, however the software says the part is suited for 3D analysis. In older versions of Moldflow which I had the software said the part is suited for 2D like in the tutorial. Where is the problem? 

8 ANTWORTEN 8
Nachricht 2 von 9
bernor_mf
als Antwort auf: victormarian

@victormarian 

Hi,

Do you refer to information such as:

Moldflow Adviser Help | Quickstart Fill tutorial: Create a project | Autodesk

 

Generally speaking, this should have been reviewed before a release that tutorial and software agree.
Probably some tweaking in software, or unexpected defect occurred.
Believe Autodesk tech support need to review this.

@mason.myers 

Mason, could you have a look at this?

Thanks.

 

Regards,

Berndt

 

( If my comments are accepted, provide "Kudos" as appreciation. If your request is answered/resolved, please click the "Accept as Solution" button. Thanks.)
Nachricht 3 von 9
mason.myers
als Antwort auf: bernor_mf

Hello @victormarian ,

 

I am not sure the last time these were updated.  As @bernor_mf  there could be minor changes in version to version.  I run most of my Adviser parts in 3D anyways.

 

Mason

Nachricht 4 von 9
victormarian
als Antwort auf: mason.myers

I imported a simple sheet of 1 mm thickness and 110 mm side. The software advises 3D simulation.

Nachricht 5 von 9
mason.myers
als Antwort auf: victormarian

Thank you again @victormarian .

 

@raalteh Are you aware of this issue?  Please let me know if I should create a support case or JIRA ticket.

 

Mason

Nachricht 6 von 9
raalteh
als Antwort auf: mason.myers

@mason.myers  I don't think we made intentional changes here. This could be a bug ... 

Hanno van Raalte,

Product Manager - Injection Molding & Moldflow products
Nachricht 7 von 9
bernor_mf
als Antwort auf: victormarian

@raalteh @mason.myers 

Hi,

just wanted to follow up if you could repeat this, and found the issue?

 

Thanks.

Regards,

Berndt

( If my comments are accepted, provide "Kudos" as appreciation. If your request is answered/resolved, please click the "Accept as Solution" button. Thanks.)
Tags (4)
Nachricht 8 von 9
victormarian
als Antwort auf: bernor_mf

Hello.

 

It seems the software recommends simulations on 3D on tutorial parts that before were recommended as dual domain. However, I imported a plastic cup with perfectly constant wall and the software recommended 2D. So not all parts are recommended as 3D. It seems a shift more on 3D side. However the tutorials should also be adapted.

Nachricht 9 von 9
bernor_mf
als Antwort auf: victormarian

@victormarian 

Hi,

Thank you for sharing your findings. :lächelndes_Gesicht_mit_lächelnden_Augen:

 

Regards,

Berndt

( If my comments are accepted, provide "Kudos" as appreciation. If your request is answered/resolved, please click the "Accept as Solution" button. Thanks.)

Sie finden nicht, was Sie suchen? Fragen Sie die Community oder teilen Sie Ihr Wissen mit anderen.

In Foren veröffentlichen  

Autodesk Design & Make Report