Announcements
Attention for Customers without Multi-Factor Authentication or Single Sign-On - OTP Verification rolls out April 2025. Read all about it here.

iLogic issues DXF export after computer rebuild

Anonymous

iLogic issues DXF export after computer rebuild

Anonymous
Not applicable

Howdy

 

I got a virus thhe week before last called the teslacrypt virus.  I had to rebuild my computer from backup and I'm now  having problems with iLogic scripts.

 

The PDF and STEP still works, but the DXF throws an error

 

Error in rule: Generate DXF, in document: 009-0016.idw

The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))

 

"More Info"

System.ArgumentException: The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
at Inventor.TranslatorAddIn.SaveCopyAs(Object SourceObject, TranslationContext Context, NameValueMap Options, DataMedium TargetData)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)

 

My vault and vault files were apparently untouched by the virus, and so I used the iLogic Browser to add the PDF, STEP, and drawing DXF back in.

 

Of course, I didn't need to do that for the files to run these scripts that already had them added as a "before save" action.  But regardless, none of them work.

 

I did not write them, I simply downloadedd them from our vault and added them in.  One of the draftsman here found them on the internet.  I had great luck running them before the virus.  This is a brand new installation of windows and Inventor 2014 sp2.

 

Any ideas?  Board would not let me upload iLogicVB so rename the file from iam

 

Regards,

 

TB

0 Likes
Reply
397 Views
3 Replies
Replies (3)

Anonymous
Not applicable
Bump. Thanks
0 Likes

Anonymous
Not applicable

Pretty Please?

 

There's no risk here folks, the virus encrypted my files and I was forced to start fresh from backup, and everything has been scanned a dozen times with Bitdefender and many others....

 

I don't know where we got these scripts, they have been working fine for at least a year and now since the rebuild it's not working, where theoretically everything should be the same.

 

Thanks.

 

TB

0 Likes

Anonymous
Not applicable
Well, I guess the software must be "self-healing".

I did a manual DXF output, and chose to save the .ini file with presets, and now the iLogic script is working again.

I didn't do anything but that.

If you have the problem described above, try doing a manual "Save As" dxf and save a configuration file of your settings, then try to run the script again.
0 Likes