I use a lot of electrical motors with a cable in a fixed length. It could be nice if I was able to use the same motor in different assemblies but with different cable path. If I could "bend" the cable and constrain it in different ways in different assemblies without having different part numbers/file names. Another example, a sticker I can wrap around a range of cylinder with different diameters. Show More

In the context of developing and debugging with iLogic in Autodesk Inventor, it’s common to execute rules repeatedly to test different conditions. Currently, the iLogic Logger (Logger.Info, Logger.Error, etc.) retains all messages from previous runs without offering any way to clear it via code. Proposal Introduce a method such as Logger.Clear() or Logger.Reset() that allows the log to be cleared at the beginning of a rule. This would help: Keep the log clean and readable during frequent testing. Avoid confusion between old and new messages. Support professional, automated logging workflows. This feature would enhance the experience for power users and developers, giving them better control and clarity when monitoring rule execution. Show More

Hello.   It would be great to have a middle indicator line to adjust the chain set dimensions This already exist with normal dimensions, but not with chain set dimensions.       Best regards, Rene Repina Show More

We can select to place point on each quadrant of a circle see below:    But when placing dimension we cannot select the quadrants of it. Can this function be added? Show More

In drawings we can set the selection priority (edge/feature/body/part) and filter (all/layout/detail/custom). But the active selection Priority and active filter is not highlighted. Please Autodesk, highlight the active menuentries or add a checkbox to see, which is active.   Show More

Hello.   It would be great to have a possibility to flip specific drawing dimenion to other way. In the example below, I would like to flip dimension "21.2" to other direction, so both dimensions are pointing into similar direction, not counter.       Best regards, Rene Repina Show More

There is some space to improve extension lines of Dimension between Concentric Arcs. If dimensioning arcs, there are the extension lines automatically created, when the dimension is placed out of the arc. But if you try to create the dimension between two concentric arcs, the extension line is not created. You are able to create the dimension only in area between of arcs. Otherwise the extension lines have to be sketched manually.    Show More

Hello. It would be great to have a possibility to expand / collapse model tree on various levels. For example expand only 1st level. Or expand everything to the 2nd level. Or collapse all to 2nd level. Etc.   Currently, only possibility is to expand / collapse all.     Best regards, Rene Repina Show More

We have a large drawing template (26 sheets total) that always presents the shown error message whenever drawings created with it are subsequently exported to .pdf file format. The painstaking part is doing the necessary detective work on 26 drawing sheets, every single note and title block element, in order to find the offending element with the unmappable font style. Please add a search/query tool in Inventor to allow just this type of detective work, only in much quicker fashion. Being able to search all elements by assigned attributes such as text font style, line type, assigned color, linked parameter, etc, would be extremely helpful. Thank you. Show More

Many times when a project consists of several sheets and need to refer from one to the other would be easier if there is an option for simultaneous viewing all sheets.   Original Author: kpapjim   Show More

Currently when creating holes, we have the options for Drilled, Counterbore, Spot face and Countersunk from the top only.   It could be beneficial to have these same options to add features to the bottom of the same hole.   As requested by : Anonymous on 5/9/2013 Show More

Hello. It would be great to have a possibility to do a face Fillet on 2 faces without writing the size. Meaning that we would select 1st face and the 2nd face and fillter would automatically go "full fillet". Currently it can be done with a little function calculation, but direct feature would be the best.       Best regards, Rene Repina Show More

Original Author:   MattH_Work     Whilst I appreciate that we cannot move features up & down the browser without changing the Part (we are free to move components up & down in the Assembly, therefore browser folder 'restructurng' has no impact), it would be nice to have a second browser (ala the Vault browser) where we can sort, reorder, add to folders, the content of a file (group all extrusions, revolves, sketches etc) Even if this was just a visual  display of the 'sorted' feature tree with no editing capability (maybe a right click option to 'Goto Feature' in main browser for editing) it would make it easier for finding, renaming etc Show More

I always have to guess whether I need to use the horizontal or the vertical constrain when sketching, since it's relative to the global coordinate system. After using other 3D softwares I've relied on that the vertical and horizontal constrains were placed relative to the orientation of the view. I don't find it efficient having to always keep track of the global coordination system when sketching, since I often rotate or orient parts and drawings. It just bugs me a lot every time I select the "wrong" option even though it's "right" choice for my exact view. Or even rework those constrains entirely. When sketching, I don't care to which coordinate system those points are vertical or horizontal, they just have to be in-line with each other. Show More

After editing the parts list, you must hit ok or apply, to save changes.  If you decide to right click and open a part from the part lists, the parts list closes without saving changes.  It would be nice to prompt the user to save their changes before exiting the parts list.  There has been way too many times that I have made a lot of changes to the parts list, and then I decide to right click on a part to open it to make a change to the properties that relate to the parts list, and I forget to hit apply, and the parts list closes without saving. Show More

Hello.   Remove "Design View Representation is locked" message in [Primary], if we use "Delete Section View".   If "Section View" is used in [Primary] view, it shows the message shown on the image below. If "Delete Section View" is used, it will still show this message all the time. If new "Design View" is created and immediately deleted, it will not show this message again.       Best regards, Rene Repina Show More

Hello.   It would be great to have a possibility to reference a thread dimenion. There is an option for "reference" for normal dimensions, but not for "hole and threads".     Best regards, Rene Repina Show More

When using ORBIT or FREE ROTATE, while pressing LMB on a plane, show how many degrees had been rotated (right hand rule) in respective axis.   Best use when looking at specific plane, to easily approximate to wanted position without needing to use contraints. Show More

When you open Measure in Tab 1 and let it be open, then opens Tab 2 and press "Done" in Measure, Inventor jumps back to Tab 1. I know the workaround is to press the small cross in the upper left, next to the header. But to me that just doesn't seem to make sense.   I don't see the value of Inventor jumping back to the tab which measure was opened? Why not just make Done and the cross do the same thing? Show More