Inventor Ideas

Anonymous · ‎02-08-2018

Is there a way we can stop the interpolation spline box from following us around when making a spline? It seems to get in the way and if you're not careful you end the spline when you don't want to.

Inventorstar · ‎02-01-2018

[IDEA] if you have a section view of a Flange part, a possibility to project the bolt circle. at the moment i do it that way This way, it would be much easier, and the drawing don't get overloaded

Anonymous · ‎01-23-2018

Hello everybody at Inventor Side. I Miss the Feature from 2014 I search an assembly thru vault. open it refresh it over Vault after it is open. Then i open the Drawings for it. And it Shows me the new Version of th assembly withot Errors. In 2018 i had to use the backdoor often if Errors like Segments or other occures. (because if u say no u get instant Errors, if u take yes it overwrite it and cant load all parts for it) Open Drawing open assembly from the drawing using rightclick>open now refresh over vault the assembly and then go back to the drawing. i prefer honestly the 2014 Version. Because in 2014 the drawings always follow the assembly and not otherwise. editing over the drawing is disabled in the Options, i check it daily. So please bring back the good old times of opening assembly, drawing and get lucky with it Best Wishes from an "angry Polish" Technical Drawer

Anonymous · ‎01-19-2018

Having option to Full Load Part in Assembly Context will be very good while working in Large Assembly.

dunlap · ‎01-15-2018

I've been using Inventor for about a year and a half and not until now did I know there was an option to create a sub-assembly in place. In other 3D CAD products, this option is in the ribbon as well as the right click menu when selecting components in the browser. For those who don't know, you can select multiple parts (also assemblies and sketches) within an assembly and press the TAB key. This will bring up a window to help you create a sub-assembly that contains all of these items AND maintain your constraints. My Idea is this: Make this option appear in the right click menu in the browser; this is where it is in other CAD packages. Also consider putting this option in the Assemble > Component ribbon within an Assembly file. Having a button to push may draw more people to explore the new option and learn new functionality.

roberto.gilardo · ‎12-28-2017

Hello everyone, I realized that Inventor View 2018 doesn't read GD&T that are in IPT files. If you want you could try with the attached file. regards, Roberto.

Anonymous · ‎12-18-2017

I'm use Vault. I have tried to use Autoloader and Project check in. I couldn't complete it. Before check in Vault, I have need to setting On Hold idw. I hope add to bulk select idw and set On Hold,open and save command.

bottonda · ‎12-12-2017

Refer to this post: https://knowledge.autodesk.com/support/inventor-products/troubleshooting/caas/sfdcarticles/sfdcarticles/Show-dimensions-disappears-after-modify-the-dimension.html 2018.0 was like this, 2018.1 went back to the old way (where you did not have to re-select every time). 2018.2 is like 2018.0 (where you have to re-select every time). I prefer the old way please (where you did not have to re-select every time). Thank You

Anonymous · ‎12-12-2017

I woud like the oppertunity to label part files to assemblies so i can choose which representation i would like to work with. This is a whole new approach of constraining parts to assemblies. Much more flexible to publish files!!

Anonymous · ‎12-04-2017

Wir nutzen das Inventor 2016 für den Messe- und Innenausbau. Als Grundlage nutzen wir vorhandene Gebäudepläne als 2D-Autocad DWG Datei. Diese DWG Zeichnungen ergänzen wir mit unseren Bauteilen als Skizze im Autocad. Beim Importieren der Autocad DWG im Inventor ist die Skizze assoziativ. Die Geometrie und alle Beschriftungen sind im Bauteil sichtbar. Leider kann man diese Skizze in der Inventor DWG nicht als Modellskizze abrufen. Dabei geht es uns nicht nur um die sichtbare Geometrie, sondern auch um die Beschriftungen und Bezeichnungen des Gebäudes.

Erosgenuino · ‎11-30-2017

Hola,la idea es la siguiente: cuando diseñas una instalación a medida que vas creando las diferentes capas, como por ejemplo la capa de electricidad o fontaneria, sería interesante que el programa te fuera mostrando el costo unitario y total de esa instalación una vez diseñada.Comparando tu actual base de datos de precios con los de proveedores.Y a posteriori, una vez finalizado los planos y el diseño poder calcular un presupuesto de ejecución de instalación automaticamente.Eso sería genial.

mahdcb · ‎11-29-2017

Save clicks by adding the feature that Inventor toggles the View Label visible when user changes the label from the default "View(X)".

Headhead4 · ‎11-21-2017

I travel a lot. I like to model on the go on my laptop. Because I'm travelling, I'm in a lot of tight areas where I cannot use my bluetooth mouse and am forced to use the mousepad which is the worst way to model. I have an idea, either update inventor (saying Inventor because that's the program I use the most, but this applies to all) to have controller support, or a brand new product that may be a simplified version of Inventor that is travel friendly. I know you all are busy maintaining the already made programs, but just consider this idea.

Anonymous · ‎10-25-2017

It is not possibile to disable the visibility of the chic from the drawing level

brent_e_barbour · ‎10-12-2017

There needs to be an option when inserting a view to display any text extruded on the model as the actual text font instead of an outline. We create labels that go on our assemblies. When creating a drawing of the label, we need to create a view for the artwork or on an ICD (Installation Control Drawing) we need to clearly illustrate the nomenclature on a label. Currently I need to retype all of the text the I already created for the model (IPT) in a sketch on the view in the drawing (IDW or DWG) and then select all the object lines of the text from the part and turn the visibility off. It's like creating the label twice with an extra step. This is a VERY tedious process but the results are a sharper image and legible text. It would be nice if when inserting a view from a IPT, IAM, or IPN if there was an option to represent model text with object outlines or fonts.

Anonymous · ‎10-07-2017

When modeling in an assembly and a work plane is created it is visible. If visibility is turned off and auto resize or example is checked, auto resize is carried through to the part file, but visibility is not. This means that the part file must be opened and visibility must manually be turned off for each work plane created. This is very annoying and time consuming. Please make visibility carry through or for those who say this is intended, make an application option that allows us to toggle this behavior.

Anonymous · ‎10-05-2017

Saludos a todos! ¿ Hay alguna forma de actualizar las reglas de manera automática? hice una regla y no se actualiza inmediatamente, debo actualizarla desde el panel browser de ilogic para ver sus resultados. atento a cualquier comentario... saludos...

Anonymous · ‎09-21-2017

The option "Select Folder Items" should be available in every menu from the top down. So far I have only found this option when editing a sub-assembly from any upper assembly. This feature would be great to have in IDW (when selecting by components filter is active), upper assemblies within IAM files, and within direct IAM files (opening the file with no subassemblies).

Anonymous · ‎09-21-2017

Dear Autodesk people... When marking hole positions with the 'Centreline Bisector' tool on a .idw drawing file it would be very helpful if the software knew which lines belong to the same hole. If there are lots of holes it can get very confusing as to which lines are paired with each other. So, if you selected a line you could then cursor along to find the line that belongs to the first line and it highlights green to verify a match. That way all the centre lines will be in perfect alignment with the elevation above. Kind regards from England Vinny

alextavora · ‎09-12-2017

Seria interessante, se na linha de tempo de uma apresentação, pudéssemos inserir um espaço de tempo, entre as ações. Muitas vezes, acontece de eu esquecer de adcionar algum detalhe, e tendo a apresentação já uma sequencia definida, tenho de selecionar todas as ações e move-las, em conjunto, para que seja criada um novo espaço de tempo. Facilitaria se eu pudesse adcionar o tempo necessário pra inserir tal detalhe, que por ventura eu tenha esquecido, ao invés de mover toda apresentação restante.

Interpolation Splice box

Project Bolt Circel in Section View

Back to the Basics

Full Load Part in Assembly Context

More Create Subassemblies In-Place Options

Inventor doesn't read GD&T

Bulk select idw and set On Hold

feature sketch dimensions

Labels vs assemblies

Modelskizzen müssen abgerufen werden können von Importierten Autocad DWGs

Base datos precios de materiales

View Label visibility

Game Controller Support Or a new product

Possibility to disable view at the drawing level

Text Object Lines in Drawing Views

Visibility of Work Features

Creación de regla para actualizar una regla

Select Folder Items

Marking hole Centres correctly

Adcionar Intervalo de tempo emuma apresentação

Forums Links