Hole Table XDIM YDIM Edit Text

[Anonymous]

I have created a hole table with the following columns:

I would like to turn off or delete or edit the text of some (not all) of the XDIM YDIM values in order to denote them as reference dimensions. I do not want to get rid of the hole all together though.

For example, if I wanted to denote the locating dimension of hole A1 the row would ideally look like this:

How would I do something like that?

Thanks.

[mcgyvr]

Why use a hole table at all then?

But no there is no option for static text for some of the holes in a hole table..

For whatever reason you want to do this.. I would just not include those in the table..

[blair]

You could remove the X & Y columns from the Hole Table, You really don't have many options to suppress or hide.

[Anonymous]

I only want a few holes to be referenced on the drawing. I have about 70 other holes that I would like in the table. For example, I have 8 A-holes that need to be referenced on the drawing and two other A-holes that can appear in the hole table.

[Anonymous]

I am hoping to avoid ordinate dimensioning, but that's where I will probably end up if this can't be done. Thank you both for your replies.

[brendan.henderson]

You can add a Hole Table and select only the holes you want included in the table. The other holes can then be dimensioned by other means.

[mikejones · Accepted solution]

How about an additional Comments column and write 'REFERENCE ONLY' for those holes?

[Anonymous]

This is the solution that I have settled on for the time being. Thank you all very much for your help.

Alex