Announcements

Starting in December, we will archive content from the community that is 10 years and older. This FAQ provides more information.

Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Sub-Assembly Placement Orientation

9 REPLIES 9
Reply
Message 1 of 10
SteveFrey
501 Views, 9 Replies

Sub-Assembly Placement Orientation

I have a few assemblies when I insert them into a main assembly they are always upside down.  I'm looking at the front view in their native state but when I insert them into another assembly they are backwards, upside down, etc.  How to I correct this so they place right side up?

Steve Frey
Inventor 2021
Windows 10 Professional 64-bit
HP ZBook 17 G6
Processor: Intel(R) Core(TM) i9-9880H CPU @ 2.30GHz
Memory: 80 GB
NVIDIA Quadro RTX5000
3D Connexion SpaceMouse Wireless
9 REPLIES 9
Message 2 of 10
CGBenner
in reply to: SteveFrey

@SteveFrey 

If both the parent and sub-assembly were modeled in the same orientation, there shouldn't be anything that would cause this.  Can you share some screenshots or a sample assembly that behaves this way (even just a dummy one)?  Cuz this sounds like something is amiss... 🤔


Chris Benner
Industry Community Manager – Design & Manufacturing


If a response answers your question, please use  ACCEPT SOLUTION  to assist other users later.


Also be generous with Likes!  Thank you and enjoy!


Become an Autodesk Fusion Insider
Inventor/Beta Feedback Project
Message 3 of 10
SteveFrey
in reply to: CGBenner

Sure. 

 

So Screen Shot 1 is the door assembly in it's native state.  

 

Screen Shot 2 is the main assembly which the door gets inserted into. When inserted the door is upside down as shown. 

Steve Frey
Inventor 2021
Windows 10 Professional 64-bit
HP ZBook 17 G6
Processor: Intel(R) Core(TM) i9-9880H CPU @ 2.30GHz
Memory: 80 GB
NVIDIA Quadro RTX5000
3D Connexion SpaceMouse Wireless
Message 4 of 10
Gabriel_Watson
in reply to: SteveFrey

Check under your Tools > App. Options > Display:

 

1- Set as "Use Application settings" to avoid different settings between components.

2- Check if your viewcube orientation is set the same way as whoever saved the parts last. Just a hunch.

 

Galaxybane_0-1668804274620.png

 

Another place to look at is under Tools > Document Settings > Modelling > Settings (UCS) > Default Plane, to see if both your top assembly and subs are using the same plane as default.

 

Message 5 of 10
johnsonshiue
in reply to: SteveFrey

Hi Steve,

 

I suspect the ViewCube in the assembly is set differently than the one in the door subassembly. Open the door subassembly and make sure the ViewCube Top is defined the same way.

Many thanks!



Johnson Shiue (johnson.shiue@autodesk.com)
Software Test Engineer
Message 6 of 10
SteveFrey
in reply to: johnsonshiue

They both are the same

Steve Frey
Inventor 2021
Windows 10 Professional 64-bit
HP ZBook 17 G6
Processor: Intel(R) Core(TM) i9-9880H CPU @ 2.30GHz
Memory: 80 GB
NVIDIA Quadro RTX5000
3D Connexion SpaceMouse Wireless
Message 7 of 10
SteveFrey
in reply to: johnsonshiue

The origin planes are different.  How do I change it?

Steve Frey
Inventor 2021
Windows 10 Professional 64-bit
HP ZBook 17 G6
Processor: Intel(R) Core(TM) i9-9880H CPU @ 2.30GHz
Memory: 80 GB
NVIDIA Quadro RTX5000
3D Connexion SpaceMouse Wireless
Message 8 of 10
johnsonshiue
in reply to: SteveFrey

Hi Steve,

 

That will be tricky. Essentially you will need to constrain the parts differently. There isn't a way to reset the origin planes. For a part, you could use Direct Edit -> Rotate/Move or Move Bodies to reorient the body.

Many thanks!



Johnson Shiue (johnson.shiue@autodesk.com)
Software Test Engineer
Message 9 of 10
A.Acheson
in reply to: SteveFrey

Best to change the sketch orientation on the workplanes, a direct edit can be used for imported parts. It takes a little time but then you get consistency when using constraints and also if you intent to use ilogic down the line to determine a rangebox size of a part the xyz orientation labels becomes important.  

If this solved a problem, please click (accept) as solution.‌‌‌‌
Or if this helped you, please, click (like)‌‌
Regards
Alan
Message 10 of 10
SteveFrey
in reply to: johnsonshiue

I'm totally confused.  Not a big deal.  I'm just going to re-create the door assembly from scratch as it's not a very complex assembly.  

Steve Frey
Inventor 2021
Windows 10 Professional 64-bit
HP ZBook 17 G6
Processor: Intel(R) Core(TM) i9-9880H CPU @ 2.30GHz
Memory: 80 GB
NVIDIA Quadro RTX5000
3D Connexion SpaceMouse Wireless

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report