Joining horizontal and ubend tube

[Anonymous]

What is the proper way/steps to put a hole in the horizontal tube and cope the ubend so they fit together?

[TheCADWhisperer]

This should be easy to do.

Please attach your file(s) and someone will demonstrate how.

[Anonymous]

The part is attached.

[TheCADWhisperer]

@Anonymous

Sketch1 is not fully defined?

Sketch2 is not fully defined?

Sketch3 is not fully defined?

Sketch3/Extrusion1/Fillet1 probably does not result in the Design Intent.

See attached.

[Anonymous]

Will this work as a better example?

[TheCADWhisperer]

Did you look at the file that I attached to my previous response?

You are going backwards in your modeling technique.

Anytime you have a sketch that is not fully defined - I recommend that you stop, do not continue - attach your file here and ask questions.

[Anonymous]

Sorry, I missed your attachment.  Your file is exactly what I was trying to do.  Once you fixed my poorly constrained sketch, what was the process to accomplish this?  Thanks.

[TheCADWhisperer · Accepted solution]

---

@Anonymous wrote:

...what was the process to accomplish this?  Thanks.

---

The steps are all preservved in the feature history. 

Inventor 101. 

[Anonymous]

I need 100 first but that will work.