how to create work plane parallel to the inline line sketch

[Anonymous]

Hi,

I am try to create of boat model and i need to create a work plane parallel to the incline line sketch as mark in attach image  along with ipt file.

Kindly help me out, I am new to inventor 2016.

Thanks in advance.

[IgorMir · Accepted solution]

Define the Work Plane by three points. Please see the attached image.

Cheers,

Igor.

[Xun.Zhang · Accepted solution]

Hello @Anonymous,

I don't have 2016 installed right now, please refer to the video below.

You can detect the input plane and create a workplane parallel to it.

https://autode.sk/2zMh5Wn

Hope it helps!

[blandb · Accepted solution]

As @IgorMir had mentioned, the 3 points that define the horizontal line and the bottom point of the sloped line will define that plane. That way if any of the 3 points move, your plane will adjust. As another alternative, you could just select your sloped line, and choose the XZ plane that runs down the center of your boat as well. Selecting the line defines the angle on the slope, while the other plane locks you perpendicular, or whatever angle you choose to put in from the origin plane.

Just a could different possibilities for you!