Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Friday Pictures?

74 REPLIES 74
SOLVED
Reply
Message 1 of 75
MikahB
3771 Views, 74 Replies

Friday Pictures?

Haven't seen any in a while though I haven't been on here as much lately either.

 

Here's a couple FIAT parts we're getting ready to release.  First is a Torque Strut (rendered in Showcase) and the 2nd is a WIP Upper Front Strut Mount replacement.

 

What are you guys/gals working on today?

Mikah Barnett
All Angles Design
Product Design Suite Ultimate 2014
Windows 7 Professional x64
Intel i7-3770k @ 4.5GHz
32GB DDR3-2400 RAM
GeForce GTX 670 4GB
74 REPLIES 74
Message 61 of 75

 

I realize not all forum members celebrate turkey-day tomorrow, but here is another Friday Picture since today is Friday for me!

 

 

Turkey Day.png

 

The 3D  model can be found at this link ( thanks to dan_inv09!)

 

 

Message 62 of 75
blair
in reply to: Curtis_Waguespack

A fowl post,

Inventor 2020, In-Cad, Simulation Mechanical

Just insert the picture rather than attaching it as a file
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.
Delta Tau Chi ΔΤΧ

Message 63 of 75

I like the gas

Stephen Gibson



View stephen gibson's profile on LinkedIn


Message 65 of 75
blair
in reply to: cbenner

Nice!

Inventor 2020, In-Cad, Simulation Mechanical

Just insert the picture rather than attaching it as a file
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.
Delta Tau Chi ΔΤΧ

Message 66 of 75
Cadmanto
in reply to: cbenner

Very similar to the equipment I work on.

 

check.PNGIf this solved your issue please mark this posting "Accept as Solution".

Or if you like something that was said and it was helpful, Kudoskudos.PNG are appreciated. Thanks!!!! Smiley Very Happy

 

New EE Logo.PNG

Inventor.PNG     vault.PNG

Best Regards,
Scott McFadden
(Colossians 3:23-25)


Message 67 of 75
Anonymous
in reply to: MikahB

DD_ch_ramp.jpg

Measured off foundations & stringlines. Materials ordered and manufactured while the ramp & block walls were being completed, and upon final measure we learn that the architect had neglected to look at the disabled access codes before sizing up this ramp and it's a bit small... and now there is a chance the builder will have to redo this whole ramp.

I'm sick of having to rework projects because people cut corners knowing full well they are risking compliance of the whole area.

</rant>

 

 

Message 68 of 75
blair
in reply to: Anonymous

I might have posted this a while back, a chassis quickly rendered out.

 

AML7600B-ABS.jpg


Inventor 2020, In-Cad, Simulation Mechanical

Just insert the picture rather than attaching it as a file
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.
Delta Tau Chi ΔΤΧ

Message 69 of 75
-niels-
in reply to: MikahB

Time to get into the spirit for the next holiday!

Kerstballen.jpg

Sadly flooded with work atm, so don't have enough time to make a nicer scene... 😞


Niels van der Veer
Inventor professional user & 3DS Max enthusiast
Vault professional user/manager
The Netherlands

Message 70 of 75
MikahB
in reply to: -niels-

Nice organic shapes, Niels!
Mikah Barnett
All Angles Design
Product Design Suite Ultimate 2014
Windows 7 Professional x64
Intel i7-3770k @ 4.5GHz
32GB DDR3-2400 RAM
GeForce GTX 670 4GB
Message 71 of 75
karthur1
in reply to: MikahB

This a structure that I am working on. Overall height is 107', width at base 47'.  Total weight is 261,500 lbs. Made of steel.

 

Pylon.png

Message 72 of 75
blair
in reply to: karthur1

Wow!

Inventor 2020, In-Cad, Simulation Mechanical

Just insert the picture rather than attaching it as a file
Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.
Delta Tau Chi ΔΤΧ

Message 73 of 75
MikahB
in reply to: MikahB

Reverse-engineered this bolt-action receiver for a buddy - this probably wins most features I've ever put into a single part!

 

 

Mikah Barnett
All Angles Design
Product Design Suite Ultimate 2014
Windows 7 Professional x64
Intel i7-3770k @ 4.5GHz
32GB DDR3-2400 RAM
GeForce GTX 670 4GB
Message 74 of 75
timdown73
in reply to: blair

Really cool!
-Tim U.
Intel(R) Core(TM) i7-10875H CPU @ 2.30GHz 2.30 GHz>Memory: 32.0 GB Ram
Op Sys: Windows 10 professional
Message 75 of 75
erdogan_isik
in reply to: MikahB

Ekran Alıntısı.PNG

 

Rendered by Inventor

 

Cay Bardagi3.png


Paylaşmak Güzeldir.(in Turkish), Sharing is beautiful.(in English)

http://www.eitasarim.com/forum
Tags (3)

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report