Angled surface

[Anonymous]

Hi

I would like to set the highlighted surface under angle I pointed in the screenhot number 2 ( I drew black line how I would like to do that) I have no idea how to start with it. Could you please help me with it

Cheers

[gcross]

PiotrekL,

First make sure your shaft (cylinder) was created from a user sketch plane at your required distance out & make sure shaft extrudes towards the face instead of out of it.

You need to create the angled surface before the shaft is created.

So, pull your EOP marker up above the shaft so you can create your angled feature before the shaft.

To create the angle, I would set up a sketch on the center plane perpendicular to the work face & extrude a triangle cut but don't worry about those 2 radiuses at the ends yet.

You can extruded those features onto the surface after your angle cut

See sample file attached. Hope this is what you want or similar.

Gary

[SBix26]

Please post the file here.  Maybe a face draft would do the job, but without the file we're just guessing.

Sam B
Inventor 2012 Certified Professional

Please click "Accept as Solution" if this response answers your question.
-------------------------------------------------------------------------------------
Inventor Professional 2013 SP1.1 Update 2
Windows 7 Enterprise 64-bit, SP1
HP EliteBook 8770w; 8 GB RAM; Core™ i7-3720QM 2.60 GHz; Quadro K4000M
SpaceExplorer/SpaceNavigator NB, driver 3.16.2
still waiting for a foreshortened radius dimensioning tool in Drawing Manager

[Anonymous · Accepted solution]

Hi

Thank you very much for the assistance. To be honest I have not realized that it was simple as that.

This is exactly what I wanted to achive.

Cheers