Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service. To translate this discussion, select the language.

Inventor Forum

Reply
Highlighted
Post 1 of 4

2013 WorkPlane Edit Dimension

630 Views, 3 Replies
05-19-2012 12:24 PM

I have three workplanes.  All three were created the same way (offsetting an existing workplane).  I want to change the offset dimension.  I can on one of the planes, but on the other two, I have to "Redefine Feature".  There is no Edit dimension available in the menu.

 

One plane like this:

 

 

Two planes like this:

 

 

Why is it different?

Post 2 of 4

Re: 2013 WorkPlane Edit Dimension

05-19-2012 09:26 PM in reply to: karthur1

Have you tried double clicking on the plane to see if it brings up the edit dialog?

Regards
Andy M
-------------------------------------------------------------------------------------------
Autodesk Inventor 2013 Pro SP1.1, Win7 Pro - 64Bit - SP1, Intel i7 960 @ 3.333 GHz
Asus X58 Sabertooth, Corsair 12Gig DDR3, AMD Radeon HD6970, Samsung 830 Series 256G SSD, 2x 3TB Seagate, 2x 2TB Hitachi,
1x 1TB Samsung, 4 x 2TB Seagate in Netgear ReadyNAS NV+, Dual Asus VE278Q Monitors
Post 3 of 4

Re: 2013 WorkPlane Edit Dimension

05-21-2012 05:42 AM in reply to: trumpy81

Double clicking on the plane does nothing.  I know it should show me the dimension so I can edit it, but it doesnt.  I have to "redefine" the workplane.

 

After I redefine them, then I can double click the plane or right-click and choose "edit dim".

 

I come across parts all the time like this... its not just this one.

Post 4 of 4

Re: 2013 WorkPlane Edit Dimension

05-21-2012 09:04 AM in reply to: karthur1

With 2013 they added the Edit Dimension to the mini toolbar pop up in canvas.  Click on the offset WP in the graphics screen and see if you have the little toolbar to choose Edit Dimension.

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.



Mark Flayler - Senior Application Engineer


IMAGINiT Manufacturing Solutions Blog: http://blogs.rand.com/manufacturing/

Post to the Community

Have questions about Autodesk products? Ask the community.

New Post