Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I would like to suggest a "variable feetrate" on the tool tab with a minimum and a maximum value.
For example in the part that I attached, the tool start cutting a big chunck of material, but when start cutting the dome the passes are very light and would be nice to be able to speed up the process.
I agree, i often have to do rough cut leaving some stock and then a precise mill in a second pass. This ends up in a very long double operation where the cam could be "smart" and cut stock fast and do a precise cut where the part is (as long as we use the same tool for both operation).
This could greatly speed up the milling of lot of parts.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")