Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Contributor
Contributor

Sorry for creating confusion here. I may have expressed myself wrongly.

 

Basically i meant it as g.lyon wrote it. A flexible conduit as additional family and not a Flex Duct/Pipe replica or something.

What I actually wanted to say was that it should have the flexibility of Flex Duct / Pipe.

I have not used Flex Duct / Pipe in detail yet but I got the idea from trying out several standard Revit Familys to see if there is one with similar to the flex conduit we need.

 

Sorry everybody. Emoticono feliz

 

 

@Martin__Schmid@ wrote

Does it provide you with the control and capability that you need from a geometry perspective, or does it leave anything to be desired?  The reason I ask is that we've had requests for folks that have attempted to route PEX piping (like this and this), using flex piping, which is basically the same editor as Flex Duct... and they have struggled, as the functionality was designed for flexible connections at equipment more so than routing long distances, and on multiple planes.

Might try it out and see if this is the case.