Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Consultant
Consultant

@Keith_Wilkinson, pardon the late response, but I'd like to jump in and make a comment.

 

I'm not clear where you got the idea that Windows do not cut in accordance to the project's View Range. They most definitely do. Because of this certainty (and the 5 Kudos that your Idea received), I am wondering if I misunderstood you. 

 

Now, if you are referring to Legends, then you absolutely correct. The Legend cut plane for a Window is defined by the cut plane in the Window family. I posted a neat workaround to this not long ago on this Forum. 

 

I believe what @samuelsanf was referring to was Masking Region - not Symbolic Lines. In order to see the Window model geometry in project cut view, you need to do away with Masking Regions in the family -- if your Window family has them.  Delete the masking region and you might as well delete the Symbolic Lines too, since it's unlikely you need or see them without the masking region.