Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Advisor
Advisor

The following to be included as default Wall properties that can be reflected in schedules

 

  • dB Rating - When noise control information required.
  • Width Core - A Wall gives the total thickness of all layers external and internal of the core. i.e. E 5mm Plaster (Core) 105mm Brick + 105 Cavity + 105mm Brick(Core) 5mm Plaster I= 325mm, The Width Core would only add values of layers within the core so as per example this total would be 315mm
  • Sub-Layers - A Stud Wall maybe 70mm wide, but only have 25mm Insulation. Right now you have to specify the following as separate layers i.e 22.5 Air + 25mm Insulation + 22.5 Air = 70mm. This can and will affect material take offs