Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Advisor
Advisor

You can accomplish this by adding detail lines with visibility parameters and dimensioning those with the instance parameters you want. If you then make your ref plans set to "not a reference" you can turn the grips on or off.

 

The circled dimensions are to the red dashed detail lines which have visibility controls. The other dimensions are to the ref planes which the filled region edges are locked too.

MikeFORM_1-1726170018624.png

 

MikeFORM_0-1726169731097.png

MikeFORM_1-1726169760834.png

In model families you can also use model lines to have the grips in 3D views.

 

Using detail lines, model lines or even ref lines (no visibility parameter) also lets you control where the grip will be as it will be placed at the midpoint of the line.