Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!

Analytical Panel Span Direction

Currently Revit analytical panels do not have the option to set a one-way span, or direction of a one-way span.

jonathan_mayer_1-1719356204799.png

By default, it seems that all panel elements are 2-way spans without the option to determine a single span directions: 

jonathan_mayer_0-1719356182759.png

 

For comprehensive analytical modeling, this is vital, as the situations of multiple beams bordering a floor, but only some attracting load, is common place in structural design. 

This is vital to allow Revit to set-up accurate analytical models before sending them to Robot.