Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Enthusiast
Enthusiast

The issue I've noticed primarily with modelling elements in section (i.e. ductwork) is with the dimensions that appear when working in section view as opposed to plan view. Say for instance one wants to draw a duct that is 16" high by 12" wide - in plan view, there are options for height, width and offset (elevation) and the duct gets modelled in accordingly. When one wants to model the same duct in section view, it would be nice for those same dimensions would apply - but instead 12" becomes the height and 16" becomes the width (i.e. dimensions are inconsistent and one has to reverse the order of the sizes in the dialog when working).

 

For extra points, it would be really cool if there was a 'depth' dialog that could be added to section view that would basically amount to modelling a length of duct in plan.

 

Not sure if this applies to other systems for other disciplines but if it does I would imagine these features would be time-saving and worthwhile!