Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Advisor
Advisor

Bentley Open Building offers the ability for Sub-levels. The issue with BOB is that there is only one degree of separation. It might be worthwhile to have 2 or 3  degrees of separation as indicated in example below

 

Example

Level (D=0)

Kitchen Counter (D=1) Level+900

Lower Cabinet Bottom Level (D=2) KC-800

Lower Cabinet Mid Level (D=3) LCBL+400

Upper cabinet (D=2) KC+900

Upper Cabinet Mid (D=3) UC+400

Upper Cabinet Top (D=4) UCM+400 / (D=3) UC+800 / (D=2) KC+1700

 

* D=X show degree of separation and specifies the referenced sub level