Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!

Show / define symbols for rise and drop other than 90 degree bends when presenting pipes as 1D

Usually we need to print our pipework as 1D. Now you cannot see offset changes for pipes as riser and drops are only shown for 90 degree bends. Maybe could add another option for symbol other than 90 degree bends. See this post https://forums.autodesk.com/t5/revit-mep-forum/45-degree-bends-on-pipes-not-displaying-properly-in-s...