Comentario
09-04-2016
05:58 PM
- editado
09-04-2016
06:05 PM
09-04-2016
05:58 PM
- editado
09-04-2016
06:05 PM
I've requested this in the past. But here is my take on it:
I want to be able to go to a view, then somewhere (View template maybe) be able to tell REVIT to turn off or on grid heads in a certain pattern. For example:
LEFT: on
RIGHT: off
TOP: on
BOTTOM: off
Then be able to modify it, and always be able to redo the process later. This might be easier if Grids had an internal orientation tied to the coordinate system, i.e. North = Top, South=Bottom, East=Right, West=Left, and angled grids (less common?) would have to be driven by quadrant, maybe NW=TOP, NE=TOP, SE=Bottom, SW=Bottom