Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Advisor
Advisor

Just to confirm understanding of this, are you referring to the view depth of a section line, or the actual section line position?

 

If regarding the view depth then have 2 additions to this feature

(1) Same feature for plan views

(2) Need a setting to control the speed/increment of the cut depth

 

Question how would you differentiate between controlling depth and zooming. Perhaps right click and select option "view depth/adjust view depth..."  When completed right click "finish/exit..."  or tick on special ribbon... If you have not done the mentioned steps then you would be in zoom mode.