Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Collaborator
Collaborator

Until Recess by Face included in Revit, use Architecture > Component > Model-in-Place > [select category] > [select face] > Void Extrusion. Draw shape, set depth, cut void from host.

 

A dedicated tool would replace the Architecture > Component > Model-in-Place > [select category] steps with Architecture > Recess by Face, for a slight time savings. I agree that it would be useful not to have select the category, decide between void modeling options, or remember to cut the void from the host.