Comentario
03-29-2021
06:13 PM
- editado
03-29-2021
06:17 PM
03-29-2021
06:13 PM
- editado
03-29-2021
06:17 PM
Current duct system in Revit is only good for HVAC, not good at all for other industrial applications. For example, municipal odor control system will require all horizontal ductwork being sloped 1-2% for draining condensation water. Industrial dust collection system with Wet Scrubber will require ductwork at downstream of the scrubber sloped because the treated air from the scrubber will be saturated therefore condensation water should be expected and drained with sloped ducting.