Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario

@Martin__Schmid  In the past we got by in Architectural coarse - as we always used that to show 90% of the 2d/3d Graphics- that had enough info- but with MEP using the line drawings as the default view for medium and fine, particularly piping - it hits them the hardest.

 

Trying to modify a family that has a mechanical shared actuator(s) or turn elements on and off for flow meters etc. is impossible in the coarse-view-only viewer. And until my users are familiar enough with Revit to edit families, I don't want them going into the families and 'just deleting' things as this will affect other types of those families irreversibly.