Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Advisor
Advisor

regarding coping I have 3 ideas. see attached sketch

1. being able to fillet two items creates an equally divided line between them

2. using extend will cope to borders

3. being able to cope ends to a ref plane so that you could set the angle of the short side that might be at a different angle to the length side. Currently draws short side 90 deg to length side. One needs to be able to have this as something different like 30 deg if required.Howe Truss.jpg