Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Anonymous
There are many lighting control devices that control multiple lighting zones. These are single devices located within single gang boxes. If I have a single device that controls 4 lighting switching zones I don't want to have to place 4 switch symbols. This can give the contractor the idea that there are 4 separate switches or large switchbank going on when in reality it is a single device that has buttons to control 4 separate lighting zones. I've provided a link as an example of a lighting control device that we use quite often. As these are a single devices they should be modeled as a single device symbol. Hope that helps clarify what I am looking for.





https://www.acuitybrands.com/products/detail/147253/nLight/nPODM-Family/-/media/products/nLight/1472...