Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Anonymous

Hi @Martin__Schmid

 

The idea is calculating "space occupied by all feeders value" (the next standard cable tray size higher than this value will be chosen) which is the total of "everything on tray" but calculating the diameters will not be accurate since there are clearance distance regulated by code, so as a work around, minimum distance occupied by feeder = feeder diameter + clearance, and clearance in that case (this might differ depending on local regulations or design criteria) was equal to the cable diameter, hope that helps