Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario

I agree that tabbing through temporary dimensions would be really useful. However for finding angles it is useful to set your snap increments to something like below, the closer the cursor is to the centre of rotation the courser the angle snap will be, i.e. really close and rotation will snap to 90° angles, a bit further out and it will snap to 45°, etc. and far enough out and it will snap to 1°. It seems that it will still go to less than 1° if too far away.

image.png