Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Collaborator
Collaborator

As a workaround, we have an invisible load family where we put all the loads. It does the demand calculations necessary for the unit loadcenter and feeder and we have a tag that displays all that information in a demand load box. The load family passes the undiversifed load on to the meter center (or panel) with a Load Classification of "Residential", then applies the 220.84 factors accordingly. This means that our unit loadcenters are not technically connected to anything - only the load family.