Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Collaborator
Collaborator

I'd like to have a way to define the leader connection points for tags and annotation symbol families. I think this could be as easy as adding a feature to pin-point the spots in a family that I'd like the leader to attach to. If those don't exist, then the current default behavior is used.

 

For example, we'd like to have a wall tag with a note next to it. We can achieve the below result by placing two tags, which is not efficient at all.

Preferred.PNG


When the above tag is edited to have a note within it, then we get this result:

CurrentIssues.PNG

 

As you can see, this doesn't work. No matter where the leader is, it's not correct or attached to the symbol.

 

Make this work better please. The current workarounds don't always work, and I don't think we should really have to do them in the first place. The tools should help us do our work the way we want to.

 

Referencing forum posts for this issue:

https://forums.autodesk.com/t5/revit-mep-forum/leader-position-on-pipe-tag/m-p/3942008#M19298

 

https://forums.autodesk.com/t5/revit-mep-forum/annotation-leader-spacing/m-p/7272192#M43414

 

Thanks!

Casey