Anuncios
Welcome to the Revit Ideas Board! Before posting, please read the helpful tips here. Thank you for your Ideas!
Comentario
Contributor
Contributor

This is exactly what i need! I'm trying to build a structural wood column family that will show as a filled in box on the associated view when cut through the cut plane, and as an 'X' to show as a point load from above when there is a column on the level above that lands on a beam in my associated view. This requires the family to be within the view extents of both my floor plan 1 and floor plan 2, for example, at the same time. There's no way to show different settings for specific detail components within a family per view. So if i turn off the 'cut through' post visibility in my floor plan 1, it also won't show in my floor plan 2, which is not what i want. Being able to have view specific yes/no parameters would REALLY help me on this one! 
Side note, to @jkidder , i beleive this was an idea for Revit 2016 in this forum, but it since has been closed due to lack of support. I'm hoping this can get looked at again, because i think it would add an incredible amount of customization options for families that they're lacking now.