uccnc post procesor and swing head

[BayEPEMQ]

Hi there,

Is there anyone how can help me to add A: aixe in to uccnc post procesor 

machine controller is a LNC MW2200 

3D fusion360

swing head go from 0 to +-90 degrees  

Please Let me know if you have one postprosesser or you know where to find one i can use 

on forehand thanks 

[boopathi.sivakumar]

Hi @BayEPEMQ 

Refer this https://forums.autodesk.com/t5/hsm-post-processor-forum/how-to-set-up-a-4-5-axis-machine-configurati...
thread to know how to configure the kinematics

[CNC_Lee]

@BayEPEMQ 

If the generic posts are not providing the required output, I offer post processor development services and happy to work out a solution for your machine! Please message me if still needing assistance.