spindle speed 1rpm outputs and M19

[douglas_pierceC66EW]

Greetings all,

How would you modify your post to output an M19 if you set the spindle speed to 1 rpm? I'm using a highspeed milling head that is externally driven and want the spindle locked

Thanks

Doug

[CNC_Lee]

@douglas_pierceC66EW 

If the generic posts are not providing the required output, I offer post processor development services and happy to work out a solution for your machine! Please message me if still needing assistance.

[douglas_pierceC66EW · Accepted solution]

I figured it out.
thanks,
Doug