I am new to the CAM game, so I don't know if it's me, HSMWorks, the post processor, or the ELX lathe that messing things up. It is probably something I am doing, but I don't know what.
My issue: The .CAM file when imported into the lathe creates incomplete lathe turning cycles. The tool offset is not what I had in HSMWorks, the feeds didn't get input and the arc directions are showing on the display, but are not inputed in the lathe program.
The .CAM is created using the published post processor for the lathe.
I attached the .CAM file and what the lathe generated (.LX2 in text format).
Any help will be greatly appreciated. Thank you.
Mike