- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report
When I enable Parametric feed and try and post a Mill Program the post always fails, this is true with the Generic FANUC and Generic HAAS posts.
I haven't tried any others.
has anyone else struck this? is there a quick easy fix?
Below is the .LOG file
Thanks
Information: Configuration: Generic FANUC
Information: Vendor: Fanuc
Information: Posting intermediate data to 'C:\Users\aaronwinter\AppData\Local\Inventor HSM\nc\1229.nc'
Error: Failed to post process. See below for details.
...
Code page changed to '1252 (ANSI - Latin I)'
Start time: Monday, January 16, 2017 2:42:26 AM
Loading locale from 'C:\Users\Public\Documents\Autodesk\Inventor HSM\Posts\common.en.lang'
Code page changed to '20127 (US-ASCII)'
Post processor engine: 4.2.1 41279
Configuration path: C:\Users\Public\Documents\Autodesk\Inventor HSM\Posts\fanuc.cps
Include paths: C:\Users\Public\Documents\Autodesk\Inventor HSM\Posts
Configuration modification date: Sunday, January 15, 2017 10:58:03 PM
Output path: C:\Users\aaronwinter\AppData\Local\Inventor HSM\nc\1229.nc
Checksum of intermediate NC data: 889bf1da0acbd2edcd4522dd40c42bc1
Checksum of configuration: f46b6cadfcdb9bf1f68dd02088e464df
Vendor url: http://www.fanuc.com
Legal: Copyright (C) 2012-2016 by Autodesk, Inc.
Generated by: Inventor HSM 4.2.0.042
...
Error: Error: Internal error.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Stack dump:
("Internal error.")@:0
initializeActiveFeeds()@C:\Users\Public\Documents\Autodesk\Inventor HSM\Posts\fanuc.cps:441
onSection()@C:\Users\Public\Documents\Autodesk\Inventor HSM\Posts\fanuc.cps:932
Failed while processing onSection() for record 252.
Error: Failed to invoke function 'onSection'.
Error: Failed to invoke 'onSection' in the post configuration.
Error: Failed to execute configuration.
Stop time: Monday, January 16, 2017 2:42:26 AM
Post processing failed.
Solved! Go to Solution.