Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am evaluation weather or not to purchase fusion 360. I would like to know if there are post processors available for an ABB6400R robotic arm to do machining. Is there a continuous 5 axis machining option?
I had the same question. From my limited knowledge of ABB robot programming, I think that it's probably much more complex than typical CAM but I'm hoping that a post processor has been created.
I haven't seen a post for ABB, though there is one for KUKA KRL, and we've also used a custom post in concert with Grasshopper & KUKA|prc to program incremental sheet forming for our KR60 & KR150 using Fusion toolpaths.
It wouldn't be too hard to create a post that describes the tool planes for milling, but the broader issue is that Fusion has no features that let you simulate or control the pose. I suggest checking out Powermill Robot, it's pretty robust and I found the 2018 interface way nicer than previous versions too.
