Community
HSM Post Processor Forum
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Post processor for UCCNC Turn

2 REPLIES 2
Reply
Message 1 of 3
neodd70
167 Views, 2 Replies

Post processor for UCCNC Turn

CNCDrive just released an update that includes a lathe screenset however there isn't a postprocessor for it yet. It is very similar to the Mach3 Turn Postprocessor with a few differences. The one difference I see right now is the way it references tool offsets. Mach3 uses the T0101 Format where the first 01 indicates the tool and the second 01 indicates the tool offset to be used whereas UCCNC uses G43 H1  where the H1 indicates which tool offset to use. Could a Postprocessor for UCCNC Turn be made that includes these changes?

2 REPLIES 2
Message 2 of 3
CNC_Lee
in reply to: neodd70

@neodd70 

I offer post processor development services and happy to work out a solution for your machine! Message me if I can be of further assistance.

If my post answers your question, please use Accept as Solution.

CNC Lee
Autodesk CAM Post Processor Expert
https://linktr.ee/cnclee
Message 3 of 3
daros_frederic
in reply to: neodd70

  • Hi always not the update for pp uccnc turn ? 

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report