Post processor for OMIO CNC X8-2200 EPL

[YBYRA]

Hi to the community!!

I use FUSION 360 to CAD-CAM wood product on my CNC router OMIO X8-2200 EPL.(https://www.omiocnc.com/products/x8-2200epl.html)

The company does not provide any specific post-processor for its machines.

So I use the RS-274D / rs274 recommended as a generic post, but I must rewrite the post by hand to adapt it to my machine every-time...

Is anybody using this machine and have any experience with post processing for it??

Thank you!!

[peter.westerberg]

I have the same problem although I have a X8-2200L-USB. Using Fusion 360 I found that "CNC Router Parts (Mach3Mill)" is working best - although I have to tweak some code. 

Keep me informed if you find anything on this! 

[YBYRA]

Here is what I found so far: looks like our controller is a re-branded "DDCSV1.1".

Have a look to this page, there is a link for a post-processor that works good for me: http://brainright.com/Projects/CNCController/

There is a discussion here: http://www.cncsharktalk.com/viewtopic.php?t=5196&p=28556

 There is also a project named "PANDORA" who develop an open-source firmware for the controller, I have not tested it yet but I will do when I think I am ready. http://www.pandora-cnc.eu/en

[peter.westerberg]

Thanks. I googled on DDCSV1.1 but it doesn't appear to have any similarity to my control box. Here is mine: 

https://www.omiocnc.com/products/x8-2200l-usb.html

Note it´s an USB. 

[YBYRA]

Hi Peter,

My model is the EPL, as written in the subject... this is the "orange box" that works offline.

As far as I know you should use MACH3 to generate g-code with your machine.