Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Post Processor for Linux CNC Horizontal Boring Mill
Post Processor for Linux CNC Horizontal Boring Mill
I'm in the process of acquiring a Wotan CNC HBM that I will be retrofitting to Linux CNC. This is a 5 axis machine, with standard X,Y,Z axis plus a W axis (spindle quill) that is parallel to Z and a B access that is the rotary table.
I'm curious if there is another post out there that could be modified for this? I'm new to Fusion (or CAD in general) and I am wanting to learn it for this machine. Just curious if there was another post out there that would work with simple modification.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")