Post Processor For Bulleri Brevetti FPM2913

[jimskeet2002]

Hi guys

I friend of mine has a Bulleri Brevetti FPM2913 cnc woodworking machine. He is working it with dxf files that he creates from a preinstalled program of this company on the machine which is called CAD/4. I am trying to find a way to post gcode files for this machine from fusion360.

I didn't find any post processor in the preinstalled folder in fusion 360. I studied the gcode files that his software generates for the machine and found some strange commands.

The first movement on the files I opened was like this example.

QX450 QY54 QZ1 QVF6000 QVR7000 QVD8000

and after this line I could read normal moves like

G1 X50 Y60

G2 X13 Y80 I5 J12

etc

Can anyone help me?

[jimskeet2002]

Here is a photo of a simple program

Does anyone have any suggestions?

[GeorgeRoberts]

Good Afternoon,

Thanks for posting. I'm unsure on what the header lines are doing in this code... It seems like they are setting some internal values, i'm just not sure what they are setting them to

Do you have a programming manual at all?

[jimskeet2002]

Thanks for the response. I am not at the machine at the moment because it belongs to a friend. When I searched in the storage yesterday I think I found some manuals but in Italic language so I didn't pay much attention since I couldn't understand them. I will contact my friend to send me the manuals and search more closely for any info about programming.